Installing Your Glass Wall Art: A Simple 4-Step Guide
Every piece of glass wall art from our studio arrives with a pre-installed metal hanging system and screw-mount brackets. No adhesive, no additional framing, and no special tools are required. Follow these four simple steps to hang your art securely and beautifully.
What is Included in Your Package
Your UV-printed tempered glass panel with pre-installed hanging plates, metal wall brackets with screws, wall anchors for drywall installation, and a leveling template for accurate placement.
Step 1: Mark and Drill
Hold the wall bracket against your wall at the desired height. Use a pencil to mark the screw hole positions through the bracket. Use a drill or screwdriver to create pilot holes at the marked positions. If mounting on drywall, insert the included wall anchors first.
Step 2: Mount the Brackets
Secure the metal brackets to the wall by screwing them firmly into the drilled holes. Use a level to ensure the brackets are perfectly horizontal. Tighten all screws securely the brackets bear the full weight of the glass panel.
Step 3: Prepare the Glass Panel
Your glass panel comes with pre-installed square metal hanging plates on the back. Depending on the size, your panel may have one or two hanging plates. Verify that they are securely attached before lifting.
Step 4: Slide and Secure
With the help of a second person (recommended for panels over 30 inches), align the hanging plates on the back of the glass with the wall brackets. Gently lower the panel so the plates slide onto the brackets. The panel will lock into place with a secure, flush-to-wall fit.
Pro Tips
For panels over 30 inches, always use two people for installation. Clean the glass surface with a soft microfiber cloth after installation to remove any fingerprints. Your glass art can be removed just as easily by lifting it upward off the brackets.
Need Help?
Contact our support team at info@glasswalldecor.com or call +1 501 237 1352.